XBoss

Super-automatic touchless leverless tyre changer

Super-automatic touchless leverless tyre changer suitable for fitting/removing all kinds of passenger car and LCV tyres from 12" to 30" (max. wheel diam. 1200 mm./47", max. wheel width 406 mm./16"). Suggested for top professional tyre specialists, servicing run flat and UHP tyres with no tool/rim contact.

Top 20 Tools is a prize awarded by "Auto Repair & Maintenance" magazine, with the help of the American magazine "Motor". The award is given by a jury consisted of automotive industry experts, dealers, instructors and technicians to the tools that stand out for their usefulness and innovation.

2015年20大工具奖

Approved by
Inspection of mounting machine according to wdk-test guideline based on wdk-Mounting/Demounting Instructions UHP and Run Flat Tyres. (*) Version available upon request
Main Features
Car (TC)

Car
Suitable for car wheels

LVL (TC)

LeVerLess
Allows tyre mounting/demounting operations without use of classic conventional tyre lever, making the operations more practical, easy, intuitive and without any stress for the operator.

Touchless (TC)

Touchless
No Contact

12\

12"-30"
Allows to operate with tyre assemblies from 12" to 30".

SLOCK

Smart Lock
SMART LOCK is the fastest manual wheel clamping system on spindle chuck in the world. Thanks to the “expanding nut” (GIULIANO exclusive patent), you just need a 90° movement on the knob after dropping the shaft into the center hole, to have a complete, safe and reliable wheel clamping on your spindle chuck, with no need of tricky hooking. Complete wheel clamping operation needs just 2 seconds. The absence of a turntable plate removes the restraint of the clamping range, normally found on conventional rim-clamp tyre changers.

JOYSTICK

Joystick
Allows to move the tool with maximum simplicity and accuracy.

TLAS (TC)

Twin Laser
Two laser pointers allow to easily set working tools in proper position simultaneously, according to tyre diameter and width.

RBB (TC)

Roller Bead Breaking
Bead breaking by disks, without contact with the rim, works with tyre assembly in horizontal position

3TOOL (TC)

TriTool
Three tools, the ideal one for each stage. Each of them automatically in correct position, and with a fixed stroke, to prevent and avoid any risk of damage on rim or tyre. Giuliano patent

CD Concept (TC)

Center Driven Concept
Bead breaker disks are slightly but purposely misaligned with the rim center for a better and faster penetration and immediate bead loosening

TMD (TC)

Total Motorinverter Drive
All working tools and devices powered by motoinverter system, extremely precise, and powerful.

XTOOL (TC)

XTool
Touchless Leverless tyre demount tool, as it works in no contact with the rim ! Extremely user friendly, fast and safe. Giuliano patent

BP1+ (TC)

Bead Pressing Arm Plus
BP1 Plus pneumatic bead pressing arm (GIULIANO patent) lifts up automatically at the end of the mounting procedure, and moves back in rest position, with no need for the operator to change his working position.

2SPEED (TC)

Two speed chuck
Two speed hydraulic chuck, allows to adjust rotation speed in accordance with the type of operation to perform, ensures work efficiency and safety.

Lift (TC)

Lift
Allows an easy and ergonomic positioning of the tyre assembly on the clamping chuck or turntable plate, so avoiding any possible stress for the operator, caused by tyre lifting operations

XBoss super-automatic touchless leverless tyre changer represents a further significant step of tyre changers' evolution. It's based on patented SA FAST system (SAfe on wheel FAST on work) and embodies the best of Giuliano technologies.
Designed with these guidelines, the new XBoss tyre-changer offers a unique, incredibly advanced and most innovative Giuliano experience yet: it's enough just to set tyre position before starting operations by means of two laser pointers (Twin Lasers). Once position is set, all functions are automatic in sequence, thanks to our TriTool system consisting of three independent mounting/demounting tools.
Equipped with XTool, a real touchless leverless tyre demount device (Giuliano exclusive patent). No matter which kind of tyre you are working with, thanks to XTool the procedure is always the same with conventional, run-flat, or "extreme" UHP low profiled tyres.
All working tools and devices are powered by motoinverter system, extremely precise, and powerful.
The arc movement of the bead breaker disks allows the disks to work purposely in misaligned position with the center hole of the rim (Center Driven Concept), thereby ensuring a better and faster penetration of the disks towards the center of the rim during the normal clockwise rotation and reducing the bead breaking time at a single turn.
XBoss tyre-changer is suitable for fitting/removing all kinds of passenger car and LCV tyres from 12" to 30" (max. wheel diam. 1200 mm./47", max. wheel width 406 mm./16") and it is recommended for top professional tyre specialists, servicing run flat and UHP tyres with no tool/rim contact.

Functions
  • Double arm/disk bead breaker system, powered by motoinverter;
  • Bead breaker disks are slightly but purposely misaligned with the rim center for a better and faster penetration and immediate bead loosening, Center Driven Concept (Giuliano patent);
  • Equipped with TriTool system, syncronized tool movements for both mounting and demounting (patent pending);
  • Double rotation speed by pedal and motoinverter;
  • Patented SMART LOCK ultra-quick wheel clamping system, through cone and shaft with Smart Lock nut;
  • All movements powered by motoinverter;
  • XTool touchless leverless tyre demount device (Giuliano patent);
  • Wheel positioning through motorized clamping chuck and laser pointers (patent pending);
  • Tyre inflation by pedal (standard);
  • Operated by pedal and control console with joysticks;
  • Equipped with BP1 Plus bead pressing arm (standard) complete with self-storage function (Giuliano patent);
  • Equipped with Lifter (standard);
  • Suitable for Tubeless tyre bead seating system (optional).
(*) Version available upon request
Rim clamping range 12" - 30"
Max. tyre diameter 1200 mm (47")
Max. tyre width 406 mm (16")
For reverse mounted wheels, variable according to rim features
Max. wheel weight 80 Kg
Bead breaker force 6860 N (700 Kg)
Operating pressure 8-10 bar (116-145 Psi)
Power supply 220V - 1ph
Motors power 0,75 kW / 2 speed
Rotating speed 7 - 16 rpm
Pre-set tyre inflating pressure 3,5 bar (50 Psi)
Net weight 640 Kg
Dimensions (WxDxH) 1800 x 1850 x 1750 mm
Standard Accessories
Pneumatic wheel positioner.
Plastic protections for Smart Lock centering cone
Rubber protections for clamping chuck
Plastic protections for clamping chuck driving pin
Plastic cone Ø 70 mm for clamping special alloy rims
Reduction ring for clamping chuck. To be used to fit particular alloy rims
Rubber protector for steel rims. (marked with •)
Rubber protector for aluminium rims (marked with ••)
Rubber protector for aluminium rims with arched spokes. (marked with •••)
Adjustment knob for SMART LOCK
Plastic bead pressing clamp with extra insert for rim edge with special inclination. To be used together with rubber protections for mounting UHP and RUNFLAT tyre according to WDK rules.
Air lubricator, air filter/water trap
Cleaning brush for SMART LOCK and clamping chuck inner surface
Plastic tyre lever. To be used during tyre demounting in accordance with the WDK procedure.
Brush
Lube paste bucket, 1 kg.
Kit of nylon protectors for mounting/demounting tool
Work gloves
CD-ROM including literature (parts book, operators manual and training video)
Optional Accessories
Wheel clamping adaptor for reverse mounted and plastic clad wheels on center post tyre changer. Standard supplied with measuring caliper and two kits of pins (6 pins 70mm length; 6 pins 100mm length).
Truck cone kit, allows clamping VANs and LCVs wheels with center hole diameter from 120 to 190 mm.
Truck cone kit, allows clamping VANs and LCVs wheels with center hole diameter from 140 to 220 mm.
Double face cone for light trucks, allows clamping VANs and LCVs wheels with center hole diameter from 75 to 145 mm.
Cone for steel rims with low thickness and center hole diameter from 75 to 120 mm
G-CLAMP Set. Helps adding extra bead-pressure points on top bead while assembling it. Kit includes 2 regular and 2 extra-size G-clamps.
G-CLAMP Set. Helps adding extra bead-pressure points on top bead while assembling it. Kit includes 2 regular and 2 extra-size G-clamps.
Kit of nylon protectors for mounting/demounting tool
Kit of 4 rubber protections for steel rims.
Kit of 4 rubber protections for aluminium rims.
Kit of 4 rubber protectors for aluminium rims with arched spokes.
Lube paste bucket, 1 kg.
Plastic tyre lever for soft tyres removing operations. To be used during tyre demounting in accordance with the WDK procedure.
Kit of 10 ABS protections for cone.
Kit of 10 rubber protections for clamping chuck faceplate
Tubeless inflation external kit.
Manual bead depressor.
Manual bead depressor with extendable travelling pad.
Kit Run Flat UHP
NYLON CONE FOR SPECIAL LAMBORGHINI WHEELS, allows clamping wheels with center hole diameter from 55 to 85 mm.
NYLON CONE FOR SPECIAL PORSCHE WHEELS, allows clamping wheels with center hole diameter from 60 to 85 mm.
NYLON CONE FOR SPECIAL BMW WHEELS, allows clamping wheels with center hole diameter from 55 to 70 mm.
XBOSS Clad Wheel

Clad Wheel

XBOSS Low Profile Wheel

Low Profile Wheel

XBOSS BMW Wheel

BMW Wheel

XBOSS Reverse Wheel

Reverse Wheel

XBOSS Standard Alluminium Wheel

XBOSS and how to deal with Alu wheels

XBOSS, Giuliano top-of-the-range touchless leverless tyre changer, provides the chance to handle with all kinds of tyres in a complete touchless, risk-free way, every day. All functions are automatic, with no contact between tools and rim, thanks to TriTool automated system (Patent Pending). All working sections are shown in our demo-video:
  • Wheel lifting by using our integrated WL lifter (supplied as standard).
  • Wheel clamping operation with patented SMART LOCK ultra-quick manual wheel clamping system (the fastest manual wheel clamping system in the world !!)
  • Bead loosening with patented CDC system, designed to guarantee an immediate bead loosening, thanks to slightly misaligned bead loosener disks.
  • Tyre demounting with XTOOL touchless leverless tyre demount device (Giuliano Patent)
  • Tyre mounting and use of optional and standard accessories.
Isn't it easy?
XBOSS Standard Steel Wheel

Standard Steel Wheel

XBOSS Run Flat Wheel

Run Flat Wheel

How to ... FRR

How to use the FRR QUICK flange?

This video shows the use and versatility of the FRR/QUICK flange designed for locking wheels with reverse channels and clad rims on all Giuliano's center post tyre changers. The same flange, once completed with a special kit, becomes the solution for locking French wheels without central hole: an accessory, two solutions!
How to ... FRB

How to use the FRB flange?

This video shows the use and versatility of the FRB flange designed for locking BMW wheels with reverse channels and clad rims on all Giuliano's center post tyre changers.
How to ... SMART LOCK

How to adjust the SMART LOCK ?

This short video will show you the quick and easy instructions to adjust SMART LOCK and keep it running at its best. Easy cleaning operations with the supplied accessories, and tightening force adjustment operations through the supplied device to quickly and safely block all types of rims.
The Boss
The Boss
JBoss
JBoss

Find your nearest Giuliano Industrial Distributor

Thanks to the large network of distributors and business partners, in Italy and worldwide, Giuliano Industrial can now offer you the right product, which best suits your needs.


Information